- Home
- Kitchens
- Custom kitchen cabinets
- Burlington
Custom kitchen cabinets in Burlington
Burlington holds postwar and older houses in Aldershot and the lakeside neighbourhoods alongside a growing set of downtown condos. Older kitchens bring bulkheads, out-of-square corners and plaster to scribe to; newer ones bring long runs, islands and ceilings tall enough for two-tier uppers. A custom kitchen is measured, drawn and rendered before a board is cut, then built in our shop and installed by the same crew.
Burlington, on the ground.
Kitchens, laundry rooms, closets, media walls and condo millwork are the usual Burlington work. We measure to the millimetre, build and dry-fit in the shop, deliver finished boxes and level, scribe and align them on site over [n] days.
Condo units in Burlington have fixed bulkheads and concrete or steel stud walls, so anchoring and cabinet depths are settled before the build.
Read more about custom cabinetry in Burlington or the full custom kitchen cabinets page.
On the drawings, and on the quote.
- 01A measured survey of the room, to the millimetre, including ceiling heights and out-of-square walls
- 02Elevations, sections and a photorealistic rendering you approve before anything is cut
- 03Boxes, doors and drawer fronts cut, edged and finished in our shop, then dry-fitted
- 04Appliance panels, tall units, pantry fittings and the island drawn as one set
- 05Delivery, levelling, scribing to your walls and door alignment by our own crew
- 06One return visit after you have lived with it, and a [term] warranty
No figures published. The drivers, in order.
| Driver | What we look at |
|---|---|
| Length of the run and the box count | Every cabinet is a box with a door or a drawer bank. More linear feet and more drawers means more shop hours. |
| Door construction | Painted five-piece and slab sit at one end, sequence-matched veneer and solid fluted fronts at the other. |
| Tall units and appliance panels | Floor-to-ceiling units, integrated fridge and dishwasher panels and a 9 or 10 ft ceiling add material and fitting time. |
| Island, stone and integrated pulls | A waterfall end, a mitred slab and pulls machined into the door change the build more than any colour choice. |
Colour, soft-close hardware and most pulls barely move the number. Every quote is itemized from your drawings and we walk you through each line before you sign.
Asked before the first call.
Do you install kitchens in Burlington yourselves?
Yes. The crew that builds the boxes in our shop delivers and installs them in Burlington. Nothing is handed to a subcontractor between the drawing and the last door adjustment.
Can I see my Burlington kitchen before you build it?
Yes. After the measure you get elevations and a photorealistic rendering with your doors, finish and hardware in your own room. Nothing is cut until you approve the drawings.
We are taking down a wall in Aldershot. When should you measure?
After the wall is out and the new framing and ceiling are in, then again after drywall if anything moved. Measuring earlier gives us a drawing, not a cut list. Design can start at any point, but the shop does not cut until the final measure is taken on the finished opening.
Can you build a media wall around a fireplace?
Yes. We need the fireplace model and its clearance requirements first, because those set how close any combustible material can sit and where the vent runs. Around that we draw cabinets, shelving and a panelled section for the screen, with cable routes and ventilation for equipment built into the boxes.