- Home
- Millwork
- Feature walls
- Clarington
Feature walls in Clarington
A feature wall is fluted or slat millwork set out so the rhythm lands correctly at both ends, with any door in the wall built from the same panel. Clarington covers Bowmanville, Courtice, Newcastle and Orono, so century main street houses, recent subdivisions and farm houses all sit in one municipality. Older homes bring plaster walls that are rarely plumb and need packing behind the panels, while newer builds give flat drywall and taller ceilings that suit a full-height run.
Clarington, on the ground.
Delivery is straightforward in the subdivisions and planned in advance for rural side roads and long driveways. We measure the wall and every plate on it, machine and finish the panels in our shop, then install against a checked substrate and hold the shadow gaps constant.
Houses outside the subdivisions in Clarington are entered from the back or side door, so that room carries the storage load.
Read more about custom cabinetry in Clarington or the full feature walls page.
On the drawings, and on the quote.
- 01A setting-out drawing showing where every flute or slat lands, plus a rendering
- 02Fluted or slat panels made in our shop in sequence-matched veneer or paint
- 03Concealed doors with the pattern carried across the leaf and the reveal kept constant
- 04Returns, reveals and a shadow gap at floor and ceiling
- 05Headboard sections with the height set against the bed and the outlets
- 06Stair wall panels scribed to the string and the treads
No figures published. The drivers, in order.
| Driver | What we look at |
|---|---|
| Wall area and returns | A flat wall is straight panelling; every return, reveal and outside corner is a mitre that has to keep the rhythm running. |
| Flute or slat profile | A fine flute means more machining per square foot than a wide slat, and a curved profile takes longer again. |
| Concealed doors in the panel | A door hidden in the rhythm needs a hidden hinge, a pivot or a touch latch, plus a leaf built to stay flat over time. |
| Material and veneer matching | Sequence-matched veneer has to be laid out across the whole wall before cutting, which is more shop planning than a painted panel. |
Each wall is quoted on its own line off the setting-out drawing, so the panelling, the concealed door and the returns are all visible as separate items.
Asked before the first call.
Can a feature wall be installed in an occupied Clarington home?
Yes. The machining and finishing happen in our shop, so the site work is fixing panels and adjusting reveals. That keeps the dust and the noise in the room for [n] days rather than across the whole project.
Can the wall carry a television or shelves?
Yes, with blocking behind it. We need the bracket details and the screen size at step 01 so the blocking is drawn in and the panel joints fall where the mount will hide them.
Can we do the kitchen in stages?
You can stage rooms, and many clients do. Staging inside a single kitchen is harder, because the counter is templated once and the appliances need finished openings. If timing is the reason, we usually suggest keeping the kitchen whole and moving another room to a later date. The itemized quote makes that simple to see.
We use the side door, not the front. Can the storage be built around that?
That is exactly how we prefer to draw it. We ask what comes through that door in each season, then size the bench, the hooks and the lockers to it. Wet gear gets an open slot that dries, and the plinth is specified so it can be wiped down rather than repainted every spring.