- Home
- Millwork
- Feature walls
- Toronto
Feature walls in Toronto
A feature wall is fluted or slat millwork set out so the rhythm lands correctly at both ends, with any door in the wall built from the same panel. Toronto's stock runs from century brick semis with plaster walls and dropped bulkheads to level, square condo suites downtown. Older homes bring plaster walls that are rarely plumb and need packing behind the panels, while newer builds give flat drywall and taller ceilings that suit a full-height run.
Toronto, on the ground.
A downtown install means either a booked service elevator and loading dock or a narrow front hall and a staircase with a tight turn. We measure the wall and every plate on it, machine and finish the panels in our shop, then install against a checked substrate and hold the shadow gaps constant.
Cabinetry in Toronto usually has to answer to an older house that has moved, so scribe allowance and site-cut fillers are drawn into the job rather than dealt with on install day.
Read more about custom cabinetry in Toronto or the full feature walls page.
On the drawings, and on the quote.
- 01A setting-out drawing showing where every flute or slat lands, plus a rendering
- 02Fluted or slat panels made in our shop in sequence-matched veneer or paint
- 03Concealed doors with the pattern carried across the leaf and the reveal kept constant
- 04Returns, reveals and a shadow gap at floor and ceiling
- 05Headboard sections with the height set against the bed and the outlets
- 06Stair wall panels scribed to the string and the treads
No figures published. The drivers, in order.
| Driver | What we look at |
|---|---|
| Wall area and returns | A flat wall is straight panelling; every return, reveal and outside corner is a mitre that has to keep the rhythm running. |
| Flute or slat profile | A fine flute means more machining per square foot than a wide slat, and a curved profile takes longer again. |
| Concealed doors in the panel | A door hidden in the rhythm needs a hidden hinge, a pivot or a touch latch, plus a leaf built to stay flat over time. |
| Material and veneer matching | Sequence-matched veneer has to be laid out across the whole wall before cutting, which is more shop planning than a painted panel. |
Each wall is quoted on its own line off the setting-out drawing, so the panelling, the concealed door and the returns are all visible as separate items.
Asked before the first call.
Can a feature wall be installed in an occupied Toronto home?
Yes. The machining and finishing happen in our shop, so the site work is fixing panels and adjusting reveals. That keeps the dust and the noise in the room for [n] days rather than across the whole project.
Can the wall carry a television or shelves?
Yes, with blocking behind it. We need the bracket details and the screen size at step 01 so the blocking is drawn in and the panel joints fall where the mount will hide them.
There is a bulkhead over my kitchen. What happens to the upper cabinets?
Two ways to handle it. We build the uppers to die into the bulkhead with a scribe at the top, or we box the bulkhead into the cabinetry with a matching panel so it reads as part of the run. Both are drawn at your measured ceiling height and shown in the rendering before you choose.
My Toronto semi has walls that are out of square. Can you still fit a straight run?
Yes. We measure the room at floor, counter and upper height, then design in scribe stiles and filler at the walls so the doors and drawer fronts line up even when the plaster does not. The fillers are cut on site during the install rather than in the shop, which is why the same crew that measures does the fitting.