Vanities in Milton
Milton is mostly new subdivision housing with 9 ft main floors and open kitchens, plus a smaller older core near the original town. Older bathrooms tend to be narrow with the rough-in already fixed, while newer builds offer a wider wall and room for a double bowl. A custom vanity is built to the width you have and drawn around the plumbing, floating on wall blocking or standing as a furniture piece.
Milton, on the ground.
Kitchen and island upgrades, walk-in pantries, mudrooms, laundry rooms and basement millwork lead the work in Milton. We measure the rough-in and the wall, build and finish the vanity in our shop, then set and level it on site so the stone can be templated against the real cabinet.
Builder kitchens in Milton leave height unused above the uppers, so the first gain is usually taking the tall run to the ceiling.
Read more about custom cabinetry in Milton or the full vanities page.
On the drawings, and on the quote.
- 01Elevations and a photorealistic rendering, with the sink and tap shown in place
- 02Drawer boxes notched around the trap so the drawer still opens fully
- 03Soft-close hinges and runners throughout
- 04Integrated pulls machined into the door, or hardware you choose
- 05A finished underside on a floating vanity, or a plinth and legs on a furniture piece
- 06Templating for the stone top once the boxes are set and level
No figures published. The drivers, in order.
| Driver | What we look at |
|---|---|
| Floating or furniture style | A floating vanity needs blocking in the wall and a finished underside; a furniture-style piece adds legs and a plinth. |
| Sink and tap choice | An undermount bowl, a vessel or a moulded top each change the cabinet, and a wall-mounted tap moves the plumbing before the boxes are built. |
| Drawers around the plumbing | Notched drawer boxes take shop time that a door and a fixed shelf do not. |
| Finish and door detail | A slab door in paint is quicker than fluting, a mitred rail or a machined integrated pull. |
The quote is written line by line off the drawings, with the cabinet, the hardware and the stone shown separately so you can see where the money sits.
Asked before the first call.
Can you replace a vanity without retiling the Milton bathroom?
Usually yes, if the new cabinet covers the same footprint or more. We measure the tile edges and the existing plinth line at step 01 and size the piece so no bare floor or unfinished tile is left showing.
How long is a bathroom out of use?
Only for the install and the stone. The cabinet goes in and is levelled in [n] days, the fabricator templates afterwards, and the top is fitted on their return. Your plumber reconnects once the stone is in.
How much notice do you need before starting?
Design starts as soon as you book a measure. The shop schedule is the part with a lead time, and it moves with finish and scope, so we give you a date in writing once the drawings are signed off. [n] weeks is typical for a kitchen of average scope. We do not cut before final measure.
Our ceilings are 9 ft. Should the cabinets go all the way up?
In most cases yes. Taking the tall units and the uppers to the ceiling gives real storage on the top shelf and removes the dust ledge. Where you want the wall to breathe, we stop the uppers and carry a painted panel up to the ceiling instead. Both versions appear on the rendering.