Vanities in King
King runs to estate lots, rebuilt farmhouses and large houses on acreage, so rooms are generous and wall runs are long. Older bathrooms tend to be narrow with the rough-in already fixed, while newer builds offer a wider wall and room for a double bowl. A custom vanity is built to the width you have and drawn around the plumbing, floating on wall blocking or standing as a furniture piece.
King, on the ground.
Kitchens with long islands, walk-in pantries, mudrooms and boot rooms make up most of the work we do in King. We measure the rough-in and the wall, build and finish the vanity in our shop, then set and level it on site so the stone can be templated against the real cabinet.
Rural addresses in King often need a gate code and a site contact, so the crew confirms both the day before install.
Read more about custom cabinetry in King or the full vanities page.
On the drawings, and on the quote.
- 01Elevations and a photorealistic rendering, with the sink and tap shown in place
- 02Drawer boxes notched around the trap so the drawer still opens fully
- 03Soft-close hinges and runners throughout
- 04Integrated pulls machined into the door, or hardware you choose
- 05A finished underside on a floating vanity, or a plinth and legs on a furniture piece
- 06Templating for the stone top once the boxes are set and level
No figures published. The drivers, in order.
| Driver | What we look at |
|---|---|
| Floating or furniture style | A floating vanity needs blocking in the wall and a finished underside; a furniture-style piece adds legs and a plinth. |
| Sink and tap choice | An undermount bowl, a vessel or a moulded top each change the cabinet, and a wall-mounted tap moves the plumbing before the boxes are built. |
| Drawers around the plumbing | Notched drawer boxes take shop time that a door and a fixed shelf do not. |
| Finish and door detail | A slab door in paint is quicker than fluting, a mitred rail or a machined integrated pull. |
The quote is written line by line off the drawings, with the cabinet, the hardware and the stone shown separately so you can see where the money sits.
Asked before the first call.
Can you replace a vanity without retiling the King bathroom?
Usually yes, if the new cabinet covers the same footprint or more. We measure the tile edges and the existing plinth line at step 01 and size the piece so no bare floor or unfinished tile is left showing.
How long is a bathroom out of use?
Only for the install and the stone. The cabinet goes in and is levelled in [n] days, the fabricator templates afterwards, and the top is fitted on their return. Your plumber reconnects once the stone is in.
Can you build a mudroom and boot room for a house this far out of town?
Yes, and it is one of the most common requests we get in King. Benches, hooks, drawers for gloves, tall lockers for coats and a section sized for dog gear. We ask how many people come through that door and what they carry, then set the bench height and locker widths around the answer.
We are at the end of a long gravel driveway. Can the truck get in?
Usually yes. We ask for a photo of the driveway and of the turning space at the house before delivery day, and we bring the cabinets in on a smaller vehicle if the approach is tight. Wet conditions on gravel can change the plan, so we confirm the route [n] days before we load.