- Home
- Millwork
- Feature walls
- Newmarket
Feature walls in Newmarket
Garage and driveway access is easy in the subdivisions, and the constraint indoors is usually the basement stair turn rather than the front door. We measure the wall and every plate on it, machine and finish the panels in our shop, then install against a checked substrate and hold the shadow gaps constant. A feature wall is fluted or slat millwork set out so the rhythm lands correctly at both ends, with any door in the wall built from the same panel.
Newmarket, on the ground.
Newmarket combines older frame and brick houses with low basements near Main Street and family subdivision housing spread around them. Older homes bring plaster walls that are rarely plumb and need packing behind the panels, while newer builds give flat drywall and taller ceilings that suit a full-height run. Kitchens with islands and pantries, mudrooms, basement kitchenettes and wall units, and closets.
In Newmarket basements the usable height is set by the ducts, so the top of the run is carried at one line across the whole wall.
Read more about custom cabinetry in Newmarket or the full feature walls page.
On the drawings, and on the quote.
- 01A setting-out drawing showing where every flute or slat lands, plus a rendering
- 02Fluted or slat panels made in our shop in sequence-matched veneer or paint
- 03Concealed doors with the pattern carried across the leaf and the reveal kept constant
- 04Returns, reveals and a shadow gap at floor and ceiling
- 05Headboard sections with the height set against the bed and the outlets
- 06Stair wall panels scribed to the string and the treads
No figures published. The drivers, in order.
| Driver | What we look at |
|---|---|
| Wall area and returns | A flat wall is straight panelling; every return, reveal and outside corner is a mitre that has to keep the rhythm running. |
| Flute or slat profile | A fine flute means more machining per square foot than a wide slat, and a curved profile takes longer again. |
| Concealed doors in the panel | A door hidden in the rhythm needs a hidden hinge, a pivot or a touch latch, plus a leaf built to stay flat over time. |
| Material and veneer matching | Sequence-matched veneer has to be laid out across the whole wall before cutting, which is more shop planning than a painted panel. |
Each wall is quoted on its own line off the setting-out drawing, so the panelling, the concealed door and the returns are all visible as separate items.
Asked before the first call.
Can a feature wall be installed in an occupied Newmarket home?
Yes. The machining and finishing happen in our shop, so the site work is fixing panels and adjusting reveals. That keeps the dust and the noise in the room for [n] days rather than across the whole project.
Can the wall carry a television or shelves?
Yes, with blocking behind it. We need the bracket details and the screen size at step 01 so the blocking is drawn in and the panel joints fall where the mount will hide them.
Can the cabinetry be brought down our basement stairs?
That is checked at the measure. We take the stair width, the headroom over the flight and the turn at the bottom, then build the run in sections that clear it. Joints between sections are placed where a stile falls, so they are not obvious once the doors are hung.
How far ahead do we need to book a Newmarket install?
The drawings and your approval come first, then the shop build takes [n] weeks, and the install is booked from the end of that. The site has to be ready as well: finished floor down, walls painted and services roughed in. [Kam confirms current booking lead time.]